XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
the upholstery / cushion from the seat frame
-
the upholstery from the cushion by releasing the 14 clips.
Installing the seat cushion upholstery (third row)
Note! For tightening torques, see Specifications See: Specifications.
Install:
-
the upholstery on the cushion using the 14 clips
-
the cushion / upholstery on the seat frame.
Hint: Start with the small weatherstrips in the corners.
Install:
-
the guide rail
-
the slider
-
the seat cushion on the seat frame
-
the outer lock
-
1 M6 nut
-
the 2 M6 screws. Tighten
-
the inner lock
-
2 M6 nuts
-
1 M6 screw. Tighten
-
the center storage compartment
-
the 2 M5 screws. Tighten
-
the outer bracket. Press into place
-
1 M6 screw. Tighten.
Upholstery Backrest Cushion (Third Row), Replacing
Upholstery backrest cushion (third row), replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
Fold down the backrest.
Fold the cargo compartment floor up.
Removing the backrest cushion upholstery (third row)