XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
the upholstery / cushion from the seat frame
-
the upholstery from the cushion.
Detach the upholstery from the clip in the cushion.
Installing service clips
Install the service clips according to: Service clips, installing See: Service and Repair/Removal and Replacement/Rear Seat, Passenger Seat, Seat/Service
Clips, Installing
Installing the upholstery on the center backrest cushion (second row)
Install:
-
the upholstery for the cushion
-
the rear section on the backrest frame
-
the 3 screws. Tighten
-
the upholstery / cushion on the backrest frame.
Fold in the weatherstrip into the channel in the rear section.
Start with the upper molding, then the lower molding and finally the moldings on the sides.
Install:
-
the guide sleeves for the head restraint
-
the bracket for the seat belt
-
the 2 screws. Tighten
-
the head restraint.
Installing the center seat (second row)
Lift in the seat.
Install:
-
the connector under the seat
-
the 4 M10 screws. Tighten
-
the side pieces over the screws
-
the outer seat according to: Upholstery backrest cushion outer (second row) See: Upholstery Backrest Cushion Outer (Second Row).
Upholstery Backrest Cushion Outer (Second Row)