XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Seat Heater: Service and Repair
Heater pad backrest and cushion, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing the front seat and important information
Remove the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat,
Replacing.
Caution! Remove the old heater pad before installing the new one. A new heater pad must not be bonded over the old pad.
Note! Read through the entire method before beginning work.
The following heater pad versions are available:
-
heater pad and seat belt reminder
-
heater pad only
-
seat belt reminder only.
Removal
Removing upholstery
Remove:
-
the seat cushion upholstery. See: Upholstery seat cushion, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front
Seat/Upholstery Seat Cushion, Replacing
-
the backrest cushion upholstery. See: Upholstery back rest, replacing, Executive See: Seat Cover/Service and Repair/Front Seat, Driver's Seat,
Front Seat/Upholstery Backrest, Replacing.
Note! Cut the half moon clips. Remove any remaining parts of the clips.