XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Bend the catch for the connector to one side. Press out the connector. Remove the connector.
Installation
Installing the seat track sensor (STS)
Install:
-
the sensor
-
the snap ring
-
the connector.
Caution! Route the wiring as noted earlier. Route the wiring so that it does not rub and is not pinched.
Install the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat,
Replacing.