XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Press out the spacer sleeve. Pry the old bushings out of the way using a screwdriver.
Installation
Tightening torque
For tightening torques see: Tightening torque See: Specifications/Tightening Torque.
Installing bushings
Press in:
-
the bushings. Lubricate using grease, part number 1161241-3
-
the spacer sleeve.
Installing the brake pedal
Install:
-
the pedal
-
the nut and the screw, 1 pc. M10.
Installing the steering column on the lower steering shaft joint
Install the steering shaft on the lower steering shaft joint.
Install:
-
a new screw, 1 pc. M8
-
the steering shaft boot and snap ring.
Fold back the carpet.
Finishing
Fit the brake lamp switch in accordance with: Stop lamp switch, replacing See: Lighting and Horns/Brake Light Switch/Service and Repair.