XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Check that all connections are free of contaminants.
Lubricate the O-rings and any hoses with brake fluid or glycerin.
Note! Do not use a soap solution or mineral oil to lubricate the hoses. Use brake fluid or glycerin.
Install:
-
the hose for the clutch cylinder. Remove the hose clip
-
the brake fluid reservoir from directly above
-
the screw on side of the brake fluid reservoir. Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Install the master cylinder