XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Brake Hose/Line: Service and Repair
Brake Pipe junction/ABS Unit, Replacing
Brake pipe junction/ABS unit, replacing
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Disconnect the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Secure the pedal in the depressed position. Use a pedal jack.
Remove the protective cap from the bleed nipple at the left front wheel.
Install a plastic hose on the nipple. Open the bleed nipple. Collect the brake fluid in a container.
Shut the bleed nipple.
Removal
Removing the air cleaner (ACL) housing