XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Applies to all models
-
Take two new clips from the kit and press them onto the edge of the plate in front of the panel over the windscreen wiper shafts.
-
Press the cable for the passenger compartment connector socket into the four clips.
-
Guide the cable down on the right-hand side of the cable duct and down through the engine compartment.
Applies to cars with 8-cylinder engine
-
Take two tie straps from the kit and clamp the cable for the heater which was detached earlier, to the newly routed cable for the passenger
compartment connector socket.