XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Remove the protective backing tape from the antenna mounting tape.
-
Press the antenna into place as close to the front edge of the roof panel as possible. Route the cable just above the edge of the roof panel.
-
Carefully bend down the front edge of the roof panel and use pieces of butyl tape to secure the cable at the panel.
Note! Do not damage the roof panel.
-
Secure the cable using three tie straps.
Warning! Make sure that the routing of the antenna cable does not interfere with the function of the inflatable curtain.
Part 2
Remote start, electric engine block heater
Installing the receiver unit