XC90 FWD L6-3.2L VIN 98 B6324S (2007)
1. the power steering pump bracket in the transmission. M8. Refer to Specifications, B6324S See: Specifications/Mechanical
Specifications/Tightening Torque
2. the power steering pump's rear stay. M8. Refer to Specifications, B6324S See: Specifications/Mechanical Specifications/Tightening Torque
3. the water pump coupling/pulley. M5. Refer to Specifications, B6324S See: Specifications/Mechanical Specifications/Tightening Torque
4. Delivery line to power steering pump. Refer to Specifications, B6324S See: Specifications/Mechanical Specifications/Tightening Torque
When removing
Remove the pins from the pulley. Rotate the power steering pump upward and rearward.
When installing
To facilitate fitting of the water pump coupling in the power steering pump pulley, turn the coupling until the spikes are in the 8 o'clock and 2 o'clock
position as illustrated. Make sure that the pins stick out through the holes in the pulley.
When installing
Make sure that the coupling's spring (2) clicks in position at the bonded part of the water pump (1) and that the pins (3) enter the holes of the pulley.
Always use new centering pins (4).
Installation
To install, reverse the removal procedure