XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Air Door Actuator / Motor: Service and Repair
Damper Motor Recirculation, Replacing
L.H.D
Damper motor module (DMM) recirculation, replacing
The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Removal
Removing the damper motor module (DMM) for recirculation
Remove:
-
the glove compartment. See Glove compartment, replacing See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair
-
the switch
Hint: Use a small electrician's screwdriver to pry up the switch by the lock. Depress the switch at the rear edge. Pull straight out.
-
the 2 x screws
-
the control module.
Check the functionality of the control module mechanism (1). Check that the arms for the dampers (2) are secure.
