XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Auxiliary Water Pump: Service and Repair
Water pump engine coolant heater, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
Remove:
-
the bumper cover. See Casing bumper front, replacing See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and
Repair
-
the control module. See Control module engine coolant heater, replacing See: Auxiliary Cabin Heater/Auxiliary Cabin Heater Control
Module/Service and Repair. Allow the cable harness to remain on the control module.
Removing the water pump for the engine coolant heater
Install hose clips on both the engine coolant hoses by the heat exchanger.
Position a container under the heater.
Disconnect the hoses.