XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Applies to the XC90
-
Pull off the D-post panel starting at the top edge. Then pull downwards until the three clips on the inside have released. Do not damage the panel
-
Remove the panel by pulling upwards slightly and unhooking it from the side panel
-
Disconnect the connector if the car has a loudspeaker in the D-post.
Illustration A shows the removal of the cover for the load securing eyelets
Applies to all XC90
-
Fold out the load securing eyelet
-
Insert a scriber with an angled tip into the hole in the top of the cover
-
Turn the scriber so that the angled tip engages in the reverse of the cover (1). Pull off the cover.
Illustration B applies to XC90 with two rows of seats
Illustration C applies to XC90 with three rows of seats