Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Maintenance > Fluids > Brake Fluid > Component Information > Service and Repair > Replacing the Brake Fluid (Using a Bleeding Unit) > Page 4653

Page 7
background image

Insert the jimmy between the brake pads (as a counterhold) to keep the piston in.
Open the bleed nipple, approximately one turn.

Pressurize the braking system using the bleeding unit

Leave the bleed nipple open until the new brake fluid enters.
Close the nipple. Remove the hose.
Reinstall the protective cap on the bleed nipple.
Remove the jimmy between the brake pads.

Install the brake caliper

See See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Brake Calipers Rear, Replacing

Remove the bleeding unit

See Remove the bleeding unit.

Finishing work

See Finishing work.

Maintenance > Fluids > Brake Fluid > Component Information > Service and Repair > Replacing the Brake Fluid (Using a Bleeding Unit) > Page 4653

[PREV PAGE] [NEXT PAGE]