XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Connect the bleeding unit. See: Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System, Bleeding (Using
Open the bleed nipple on the caliper. Wait until there is new oil in the plastic hose. Close the bleed nipple
Press down the brake pedal to the limit position.
Keep it pressed down for approximately 2 seconds before releasing it. Repeat until there is new brake fluid in the plastic hose.
Close the bleed nipple when the brake pedal is fully depressed.
Remove the hose.
the protective cap.
the G-clamp from the brake caliper. Repeat the process with the other front wheel.
install the wheel. See: Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Replacing brake fluid, rear
Remove the protective cap from the bleed nipple. Install a new plastic hose on the nipple.
Open the bleed nipple. Collect the brake fluid in a container.
Press the brake caliper piston to the bottom of the caliper.
Use G-clamp as illustrated. Leave the G-clamp in pushed in position.