Workshop Manuals Factory service & repair Volvo
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Volvo XC90 FWD L6-3.2L VIN 98 B6324S (2007)05 · Powertrain Management
05 · Diagnostics

Central Electrical Unit Engine Compartment (Body Control Module) (page 40 of 48)

Make
Volvo
Model
XC90 FWD
Engine
L6-3.2L VIN 98 B6324S
Year
2007
Section
Relays and Modules - Computers and Control Systems › Body Control Module › Service and Repair
Powertrain ManagementCentral Electrical Unit Engine Compartment · page 40 of 48
background image

Always check that the control module and control module box connectors do not have bent or damaged terminals or sockets. This may have been the
cause of the fault.

Removing the passenger door module (PDM)

Ignition off.

Remove:

-

the door panel, see Panel front side door, replacing See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair.

-

the nut and screw holding the control module in place

-

the connectors.

Grasp the underneath of the control module. Press upwards. Carefully pull the control module from the lower catches.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2007 Volvo XC90 3.2L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.