Workshop Manuals Factory service & repair Volvo
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Volvo XC90 FWD L6-3.2L VIN 98 B6324S (2007)05 · Powertrain Management
05 · Diagnostics

Central Electrical Unit Engine Compartment (Body Control Module) (page 44 of 48)

Make
Volvo
Model
XC90 FWD
Engine
L6-3.2L VIN 98 B6324S
Year
2007
Section
Relays and Modules - Computers and Control Systems › Body Control Module › Service and Repair
Powertrain ManagementCentral Electrical Unit Engine Compartment · page 44 of 48
Central Electrical Unit Engine Compartment (Body Control Module) (page 44 of 48) – Volvo XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Order software. See: Testing and Inspection/Programming and Relearning/Software Downloading

Vehicles with Xenon headlights, without four_C

Perform calibration acc. to: VIDA/Vehicle communication/Function group 3/Rear electronic module (REM)/Calibrating position sensor Bi-Xenon lights.

Upper Electronic Module (UEM)/Rearview Mirror, Replacing

Upper electronic module (UEM)/rearview mirror, replacing

Removal

Preparatory information

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Note! A rear view mirror with manual function cannot be replaced with automatic anti-dazzle or vice versa. The system will store diagnostic
trouble codes (DTCs). The upper electronic module (UEM) is integrated in the rear view mirror.

Note! Read off data from the control module before replacing the control module. Program this data back into the new control module.
Programmed data is read off via VIDA vehicle communication.

Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.

Note! Always check that the control module and control module box connectors do not have bent or damaged terminals or socket/sleeves. This
may have been the cause of a fault.

Preparatory work

Remove the interior lighting. See Interior lighting, replacing See: Lighting and Horns/Dome Lamp/Service and Repair/Interior Lighting, Replacing.

Removing the rear view mirror/control module

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

The same page in: XC90 AWD L6-3.2L VIN 98 B6324S (2007), XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005), XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005), XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005), XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005), XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005), XC90 AWD L6-3.2L VIN 98 B6324S (2007), XC90 AWD L6-3.2L VIN 98 B6324S (2007), XC90 AWD L6-3.2L VIN 98 B6324S (2007), XC90 AWD L6-3.2L VIN 98 B6324S (2007), XC90 AWD V8-4.4L VIN 85 B8444S (2005), XC90 AWD V8-4.4L VIN 85 B8444S (2005), XC90 AWD V8-4.4L VIN 85 B8444S (2005).

Parts & tools for this job For 2007 Volvo XC90 3.2L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.