Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Entertainment System Control Module > Component Information > Service and Repair > Infotainment Control Module (ICM), Replacing > Page 286

Page 6
background image

Press the infotainment unit into place on the bracket.
Install and tighten the screws.
Reconnect connectors.

Note! The connectors for the CD and MD-control modules are identical and can be switched.

Note! Check that there is no dirt in the optic connectors.

Note! The bend radius of the optic cables must not be less than 25mm.

Angle in the infotainment / dashboard environment panel and bracket.

Hint: Align the upper section, press upwards, angle in the lower section.

Install the screws in the lower section of the bracket and tighten.
Install the panel at the gear selector lever.

Note! After replacing the infotainment control module (ICM)/display, new software must be ordered and programmed.

Ordering software

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Entertainment System Control Module > Component Information > Service and Repair > Infotainment Control Module (ICM), Replacing > Page 286

[PREV PAGE] [NEXT PAGE]