XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Applies to the XC90
Pull off the D-post panel starting at the top edge. Then pull downwards until the three clips on the inside have released. Do not damage the panel
Remove the panel by pulling upwards slightly and unhooking it from the side panel
Disconnect the connector if the car has a loudspeaker in the D-post.
Illustration A shows the removal of the cover for the load securing eyelets
Applies to all XC90
Fold out the load securing eyelet
Insert a scriber with an angled tip into the hole in the top of the cover
Turn the scriber so that the angled tip engages in the reverse of the cover (1). Pull off the cover.
Illustration B applies to XC90 with two rows of seats
Illustration C applies to XC90 with three rows of seats