Volvo Workshop Manuals
XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 1633
When the first join is completed and checked, join the rest of the wire ends in the same way.
Heating the shrink tubing
The shrink tubing ensures the electric wire is satisfactory and provides a safe join.
Hint: Suitable setting of heat gun 951 2777 Hot-air gun See: Tools and Equipment/951 2777 Hot Air Gun , air distribution switch in position 2 and
Heat the sleeve using the hot air gun 951 2777 Hot-air gun See: Tools and Equipment/951 2777 Hot Air Gun and suitable jet kit. Heat the shrink tubing
Note! Adjust the heat shield if necessary.
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
The commonest types of connector and central electrical unit in the vehicle are listed here.
Note! Before working in the connector, disconnect the battery negative terminal, Battery, disconnecting See: Starting and
|[PREV PAGE] [NEXT PAGE]|