XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Remove the right-hand side panel from the centre console by pulling it off. Start at the front edge and then work backwards until all the clips have
released.
-
Remove the sill trim panel for the right-hand front door. Pull it off, starting at the front edge, until the clip there has released. Continue backwards
until the remaining clips have released
-
Move the sill trim panel to the right in order to fold the carpet away from the right-hand side of the bodywork.
Installing the right-hand mounting
-
Push the floor carpet to one side
-
Enlarge the existing hole (1) in the bodywork. Use a 13 mm (33/64") diameter drill bit
-
Smooth off and rust-proof the edges of the hole.