Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Ultrasonic Sensor, Antitheft > Component Information > Service and Repair > Movement Sensor, Alarm > Page 2769

Page 7
background image

-

Reinstall the clip in the headlining behind the centre interior lighting

-

Reinstall the three screws in the mountings above the rear side windows. Tighten the screws. Tighten to 50 Nm (37 lbf.ft.)

-

Reinstall both covers over the screws

-

Tighten both grab handles. Tighten to 10 Nm (7.5 lbf.ft.). Press the covers into place

-

Reinstall the C and D-post panels. Connect any connectors

-

Connect the connector to the rear interior lighting.

Applies to cars with three rows of seats

-

Reinstall the rear headlining.

-

Turn the ignition key to position II

-

Connect the battery ground lead

-

Program the function using VCT 2000 in VIDA.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Ultrasonic Sensor, Antitheft > Component Information > Service and Repair > Movement Sensor, Alarm > Page 2769

[PREV PAGE] [NEXT PAGE]