Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Brake Light Switch > Component Information > Diagrams > Diagram Information and Instructions > Page 3470

Page 10
background image

Assembling the combined connector (2 optic and 4 electrical conductors) 

Install the ferrule. See Assembling the connector.

Press the inner section into place in the combined connector.

Finishing work

Check the repair. See Optical wiring harness check See: Wiring/Optical Wiring Harness Check.

Joining the Cables

Joining the cables

Connecting

See information about SRS cables: Refer to: Cable harness SRS system, repair See: Restraint Systems/Air Bag Systems/Air Bag/Air Bag
Harness/Service and Repair/Procedures 

Perform battery disconnection. Refer to: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting 

See information about cable terminals surface treatment. Refer to: Cable terminals surface treatment See: Power and Ground Distribution/Wiring
Harness/Service and Repair/Cable Terminals Surface Treatment 

Sensors and Switches > Sensors and Switches - Lighting and Horns > Brake Light Switch > Component Information > Diagrams > Diagram Information and Instructions > Page 3470

[PREV PAGE] [NEXT PAGE]