Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Trunk Lamp Switch > Component Information > Service and Repair

Page 1
background image

Trunk Lamp Switch: Service and Repair

Replacing the switch for the lock unit/cargo compartment lighting

Removal

Lock unit

The switch for the cargo compartment lighting is positioned in the lock unit.

-

Remove the upholstery on the tailgate. This is to gain access to the entire lock unit mechanism

-

Unhook the lever from the lock cylinder mechanism

-

Remove the screws (3 x) from the lock unit. Remove the lock unit

-

Disconnect the connector.

Installation

Lock unit

Install:

1. the connector,
2. the three screws for the lock unit. Tighten the screws to 10 Nm,
3. the lever for the lock mechanism,
4. the upholstery.

Sensors and Switches > Sensors and Switches - Lighting and Horns > Trunk Lamp Switch > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]