XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Installation
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable,
The secondary lock
Press the secondary lock into place.
Finishing work
Install the relays.
Note! Take care with the positioning.
Install the relevant relay box.
Connector Supplemental Restraint System Module (SRS), Repair
Connector Supplemental Restraint System Module (SRS), repair
Special tools: 951 2812 Terminal removal tool See: Tools and Equipment/951 2812 Terminal Removal Tool , 951 2637 Terminal removal tool See:
Tools and Equipment/951 2637 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Connector, dismantling
Secondary lock