XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Fitting the bolts to the right-hand engine pad
Install the 2 x screws. Tighten. See: Tightening torque, B8444S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Installing the wing liner
Install:
-
the wing liner
-
the plastic nuts, x2.
Removing the lifting tool
Remove the lifting tool 999 5716 Reading off tool See: Tools and Equipment/999 5716 Reading off Tool , kit: 999 7070 Mounting See: Tools and
Equipment/999 7070 Mounting and lifting hooks: 999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook.
Fitting the bolts to the torque rod
Install the 2 x M10 screws, by the suspension turret on both sides.
Finishing
Install the front wheels on both sides. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Remove the oil filler cap.
Install:
-
the upper front engine casing
-
the oil filler cap. Carry out wheel alignment in accordance with: Wheel alignment, checking / adjusting See: Alignment/Service and Repair.
