volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Suspension|Page 16521 > < Switch Unit Continuous Damping Control (CCD)|Page 16516
Page 1
background image

Suspension Spring ( Coil / Leaf ): Service and Repair
Front Suspension

Spring front, replacement

Special tools:

999 5467 Socket See: Tools and Equipment/999 5467 Socket 
999 5469 Socket See: Tools and Equipment/999 5469 Socket 
951 2050 Bevel Protractor See: Tools and Equipment/951 2050 Bevel Protractor 
951 2911 Hydraulic Piston See: Tools and Equipment/951 2911 Hydraulic Piston 
951 2914 Claw See: Tools and Equipment/951 2914 Claw 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparations

Remove:

-

the wheel

-

the anti-roll bar link from the spring strut.

Note! Use a Torx wrench as a counterhold so that the boot is not damaged.

Remove:

-

the ABS line from the spring strut.

-

The ABS sensor. Hang up the sensor using a piece of wire.

Measure the spring strut position in relation to the wheel spindle before removal

Front Suspension|Page 16521 > < Switch Unit Continuous Damping Control (CCD)|Page 16516