volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 11099 > < Procedures|Page 11097
Page 5
background image

Allow the transmission fluid to heat up to 50° C.

Note! The fluid will not heat up faster by stalling.

Place a lower drip shield on the floor under the vehicle.
While the engine is running, remove the integrated level plug (TORX 40).
Allow the excess fluid to run out.
When the fluid is between 50° C and 60° C, check that the transmission fluid has stopped running out and is only dropping from the level plug hole.

Caution! It is essential the temperature not exceed 60° C, as this can result in the transmission fluid level being too low.

Procedures|Page 11099 > < Procedures|Page 11097