XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Seals and Gaskets: Service and Repair
Sealing Ring, Bevel Gear, Left
Sealing ring, bevel gear, left
Operation number: 43335-2
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removal
Removing bevel gear
Remove the bevel gear. Refer to: Bevel gear, TF-80SC AWD .
999 7086 Puller See: Tools and Equipment/999 7086 Puller.
Note! Check thoroughly that no seal residue remains.
Position the bevel gear over a receptacle.
Allow the oil to run out through the bearing.
Clean any spilled oil from the seal ring seat in the bevel gear using a lint-free cloth.
Installation