XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Position the bevel gear over a receptacle.
Allow the oil to run out through the bearing.
Clean any spilled oil from the seal ring seat in the bevel gear using a lint-free cloth.
Installation
Install:
-
999 7189 Drift See: Tools and Equipment/999 7189 Drift
-
the gasket.
999 7189 Drift See: Tools and Equipment/999 7189 Drift.
Note! When the tool is removed, check that 999 7189 Drift See: Tools and Equipment/999 7189 Drift was removed with it.
Installing the angle gear
Install the bevel gear. Refer to: Bevel gear, TF-80SC AWD .
Finishing
Checking the oil level