XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Note! The automatic transmission has one gear selector cable while the manual transmission has two cables.
Ensure that the gear selector cable is locked in position before installing the blue clip. Press the clip into place as illustrated.
Check that the clip is positioned in the groove as illustrated.
Installing the air cleaner (ACL) housing
Install the air cleaner (ACL) housing, including all hoses and electrical terminals.
Installing the front wheels
Install the front wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Gaiter, Gear Selector, Replacement
Gaiter, gear selector, replacement
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the gear selector knob
Remove the gear selector knob in accordance with: Gear selector knob, replacing See: Gear Selector Knob, Replacing (standard) or in accordance with:
Gear selector knob, Geartronic, replacement See: Gear Selector Knob, Geartronic, Replacement (geartronic).
Removing the panel