XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Pull loose the gear lever knob by forcefully pulling it straight upward.
Note! A lot of force is required to pull it loose.
-
Place the new knob in the correct position on the gear lever.
-
Drive down the knob in position.
Hint: Use, e.g., a plastic hammer and a spacer between the knob and hammer to avoid damaging the gear lever knob.
-
Check that the gaiter's seams are straight. Then fix the lock ring by pulling it down and the gaiter straight up against the knob, and secure it by
pressing it into place.
-
Check that the gear lever knob is fastened securely by pulling on it. Also check that the lockout function works in all its positions.
Solenoid Back-Up (Reverse) Inhibitor, Replacing
Solenoid shift lock, replace
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.