XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Install:
-
the gear selector assembly stop and press it into place in the gear selector assembly
-
the yellow lock pin.
Check that the gear selector assembly stop is securely in place.
Connect the connectors.
Connect the rear connector to the gear selector assembly. Angle the front connector into the gear selector assembly.
Secure the wiring to the gear selector assembly.
Installing the top panel
Install:
-
the locking sleeve for the boot above the gear selector
-
the top panel.
Installing the gear selector knob and lock bracket
Install the gear selector knob. See Gear selector knob, Geartronic, replacing, B8444S, TF-80SC AWD, B6324S, TF-80SC, B6324S, TF-80SC AWD
See: Gear Selector Knob, Geartronic, Replacing. Install the lock bracket. See, Gear selector knob, Geartronic, replacing, B8444S, TF-80SC AWD,
B6324S, TF-80SC, B6324S, TF-80SC AWD See: Gear Selector Knob, Geartronic, Replacing.
Installing the center console
Install the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair.