XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Caution! Ensure that there is no grease on the mating surfaces between the boot and the joint housing. Make sure that no creases form in the
boot when the clamps are tightened.
Clean away excess grease with isopropanol. Slide the boot on the constant velocity joint. Ensure that the boot is in position on the constant velocity joint.
Vent the boot.
Install the cl amps.
Squeeze together the clamps. Use: 9512619.
Install a new expander ring differential.
Finishing
Installing drive shafts
Install the driveshafts. Refer to: Drive shaft left, replacing, TF-80SC AWD, B6324S, TF-80SC, B6324S, TF-80SC AWD See: Service and Repair/Drive
Shaft Left, Replacing and Drive shaft right, replacing, TF-80SC AWD, B6324S, TF-80SC, B6324S, TF-80SC AWD See: Service and Repair/Drive
Shaft Right, Replacing.
Use: Spray wax, 30787812