XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Apply adhesive.
The adhesive bead must be 6 mm wide 12 mm high.
Note! Mount the windshield within 10 minutes.
Install the windshield.
Install:
-
the guide molding at the lower edge
-
the plenum chamber cover. See Cowl, replacing See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair
-
the wiper arms
-
the rain sensor. See: Rain sensor See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Rain Sensor/Service and Repair.
Note! Park the car on an even surface. Cure for three hours at a minimum temperature of +5° C otherwise apply extra heat.