XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Wiper Motor Linkage: Adjustments
Control links/wiper mechanism, adjusting
Adjustment
Control arms
-
Detach the control arms from the link arm
-
Remove the nut from the link arm
-
Run the motor to the parked position
-
Adjust the position of the link arm. The link arm must be parallel with the outer control arm
-
Apply thread sealant liquid P/N 9961053-2 to the threads of the motor shaft
-
Tighten the nut. Use a 20 mm fixed wrench on the link arm as a counterhold
-
Install the control arms
-
Test drive the mechanism.
Other information
To replace windshield wiper components, see Wiper mechanism windshield, replacing See: Service and Repair/Wiper Mechanism Windshield,
Replacing and Motor windshield wiper, replacing See: Wiper Motor/Service and Repair/Motor Windshield Wiper, Replacing.