Do Not Sell My Personal Information
yugo Workshop Repair Guides

Yugo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Brake Caliper: Service and Repair
Removal/Installation

1.

Raise and support vehicle and remove front wheels.

2.

Plug outlet ports in brake fluid reservoir.

3.

Disconnect brake hose at caliper.

4.

Remove cotter pins from locking blocks.

5.

Using suitable tool, drive out locking blocks.

6.

Lift off caliper.

7.

Reverse procedure to install.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal/Installation

< PREV PAGE NEXT PAGE >