Workshop Repair Manuals

Yugo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

yugo Workshop Repair Guides


Yugo L4-1300cc 1.3L (1991)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Component Information > Technical Service Bulletins > Technical Service Bulletins for Automatic Transmission/Transaxle: > ATRATB294 > Jan > 95 > A/T - Drive Axle and Wheel Lug Nut Torque Specifications

Page 1
background image

Automatic Transmission/Transaxle: Technical Service Bulletins
A/T - Drive Axle and Wheel Lug Nut Torque Specifications

TECHNICAL BULLETIN # 294

DATE: 1995

TRANSMISSION: General

SUBJECT:  Drive Axle and Wheel Lug Nut Torque

APPLICATION: Service information

AXLE AND LUG NUT SERVICE INFORMATION

It is critical to tighten the axle and lug nuts to factory specifications.

Important:

The following charts contain both DRIVE AXLE NUT and WHEEL LUG NUT tightening values. Make certain the correct tightening torque is used
by referring to the chart headings.

WARNING

If the factory tightening specifications are not followed, bearing life will be shortened or mechanical loads will not be spread evenly.

^

Install axle(s) and wheel(s).

^

Install nuts and hand tighten.

^

Lower vehicle until wheels begin to touch the ground.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Component Information > Technical Service Bulletins > Technical Service Bulletins for Automatic Transmission/Transaxle: > ATRATB294 > Jan > 95 > A/T - Drive Axle and Wheel Lug Nut Torque Specifications

[PREV PAGE] [NEXT PAGE]