RDX L4-2.3L Turbo (2008)
9. Remove the screws, and release the hooks (A), then remove the seat belt hole cover (B). Slip the rear center seat belt out through the slit (C) in the
seat belt hole cover.
10. Pull out the armrest cover (A) to release the upper edge of the cover, and detach the clip. Pull out the armrest cover to release the hooks (B) from
the seat-back frame wire (C) and the hook (D).
11. From behind the seat-back, release the hook (A), and unzip the seat-back cover (B). Pull back the seat-back cover.