RL V6-3.7L (2009)
Seat Heater: Testing and Inspection
Seat Heater Test (Without Seat Ventilator)
Seat Heater Test
Driver's Seat
1. Remove the driver's seat, See: Service and Repair/Front Seat Removal/Installation then remove the seat-back cover. See: Seat Cover/Service and
Repair/Front Seat-back Cover Replacement
2. Disconnect the 4P connector (A) from the seat cushion heater and 2P connector (B) from the seat-back heater.
Seat-Cushion Heater Test
3. Check for continuity between the seat cushion heater 4P connector terminals No. 1 and No.2, and No. 2 and No. 3 terminals. There should be
continuity. If there is no continuity, replace the seat cushion heater.
Seat-back Heater Test
4. Check for continuity between the seat-back heater 2P connector terminals No. 1 and No. 2. There should be continuity. If there is no continuity,
replace the seat-back heater.
5. Reconnect the 4P and 2P connectors to the seat heaters, and check for continuity between the seat cushion heater 4P connector terminal No. 3 and
the seat-back heater 2P connector terminal No. 2. There should be continuity. If there is no continuity, repair an open in the wire between the seat
cushion heater and the seat-back heater.
Front Passenger's Seat
1. Remove the front passenger's seat. See: Service and Repair/Front Seat Removal/Installation