SLX V6-3.2L SOHC (1996)
Windshield: All Technical Service Bulletins
Wind Noise at the A-Pillar
April 23, 1996
BULLETIN NO
96-014
YEAR
1996
MODEL
SLX
VIN APPLICATION
ALL
Wind Noise at the A-Pillar
SYMPTOM
A vibration or buzzing noise coming from the area of the A-pillar at speeds over 60 mph.
PROBABLE CAUSE
The rubber molding along the edge of the windshield is vibrating.
REQUIRED MATERIALS
3M Super Silicone Sealant: 3M P/N 051135-08662
CORRECTIVE ACTION
Seal the rubber molding to the A-pillar with adhesive.
1.
To protect the paint, apply a strip of masking tape (minimum of 1 inch wide) to the A-pillar along the edge of the rubber molding.