TL FWD V6-3.5L (2009)
Armrest assembly/grip assembly removal
12. Remove the armrest/grip assembly (A) from the door panel (B).
Disconnect the door subharness connector (C), and, on the driver's side, disconnect the seat position memory switch connector (D) and the power mirror
switch connector (E).
-2 Remove the screws from back of the door panel and the front of the grip trim.
Pull out along the edge of the armrest/grip assembly to release the hooks (F).
13. Remove the screws, then separate the armrest assembly (A) and the grip assembly (B).