ZDX V6-3.7L (2010)
Cruise Control Switch: Service and Repair
Adaptive Cruise Control (ACC) Combination Switch/Distance Switch Removal/Installation
Adaptive Cruise Control (ACC) Combination Switch/Distance Switch Removal/Installation
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or service.
1. Remove the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel
Removal.
2. Remove the paddle shifter See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and
Replacement/Paddle Shifter Replacement.
3. Remove the center trim (A).
4. Disconnect the 12P connector (B), and remove the ACC combination switch/distance switch (C).
5. Install the parts in the reverse order of removal.