audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
End of output > < Adaption

A3 Mk1

Body Self-diagnosis
Ultrasonic interior monitor self-diagnosis
Erasing fault memory

Note:

If it is not possible to erase fault memory, interrogate it once again and rectify faults.

Preconditions:

  • ◆ Fault memory interrogated.
  • ◆ All faults rectified.

After fault memory has been successfully interrogated:

Performing function "05 - Erase fault memory"
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX
  • ‒ Press keys -0- and -5-.
 
→ Indicated on display:
Rapid data transfer     Q
05 - Erase fault memory
  • ‒ Confirm input with Q key.
 
→ Indicated on display:
Rapid data transfer    ⇒
Fault memory is erased

The fault memory is now erased.

  • ‒ Press ⇒key.
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX

 
→ The appearance of this message on the display indicates an error in the test sequence.
Warning!    ⇒
Fault memory has not been interrogated

 
→ The appearance of this message on the display indicates an error in the test sequence.
Rapid data transfer    ⇒
Fault memory has not been interrogated

Observe test sequence exactly: First interrogate fault memory, if necessary rectify faults, then erase.

Erase according to fault memory; exit output with 0; deactivate and reactivate ignition; interrogate fault memory again.

End of output > < Adaption