audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing 2-way lumbar support > < Removing and installing fitting panels

A3 Mk1

General Body Assembly, Interior (Repair groups 68, 69, 70, 72, 74)
Recaro seat
Removing and installing spring trim
 
A72-0148
  • Backrest
  • Spring trim
  • ◆ Removing
    • ‒ Raise seat as far as possible.
    • ‒ Release two bolts -3- on right and left at spring trim -2-.
    • ‒ Pull spring trim -2- off seat on right side.
    • ‒ Then pull spring trim to right such that clip -4- in spring trim is released.
    • ‒ Detach spring trim -2- from seat.
 
A72-0148
  • ◆ Installing
    • ‒ Attach spring trim -2- on left side with clip -4-.
    • ‒ Press on spring trim -2- on right side such that it engages.
    • ‒ Re-tighten the two bolts -3-.
  • Bolts (2x)
  • Clamp

Removing and installing 2-way lumbar support > < Removing and installing fitting panels