audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Notes on heater in vehicles with map-controlled heating > < Removing and installing dust and pollen filter
Heating, Air Conditioner
Servicing heating
Connection diagram for vacuum hoses for actuating the refrigerant shut-off valve
 
A80-0139

Note:

The refrigerant shut-off valve is only installed in vehicles with map-controlled cooling.

  • Vacuum hose
    • ◆ To vacuum connection on engine

=> Relevant Workshop Manual Engine Mechanical Components

  • Non-return valve
    • ◆ Arrow on vacuum valve points towards engine
 
A80-0139
  • Two-way valve for refrigerant shut-off valve -N147
    • ◆ An additional switch for rotary temperature selection knob -F269 is attached to the heater control; this switch actuates -N147.
    • ◆ The two-way valve -N147 is installed on the left-hand side of the engine compartment (as viewed in direction of travel) above the master brake cylinder.
  • Refrigerant shut-off valve
    • ◆ Ensure refrigerant flows in correct direction (arrow).
    • ◆ The refrigerant shut-off valve is installed in the refrigerant hose between the engine and heat exchanger in heater (refrigerant feed).

Notes on heater in vehicles with map-controlled heating > < Removing and installing dust and pollen filter