audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing clutch pedal switch F36 (round housing) > < Pedal cluster - exploded view of components

A3 Mk1

Removing and installing clutch pedal switchF36 (square housing)
Removing and installing clutch pedal switch -F36- (square housing)
  Note
Switch may only be fitted once so as to ensure a firm fit.
   
Removing
–  Remove storage compartment on driver's side → Rep. Gr.68.
–  Unplug electrical connector from clutch pedal switch.
–  Remove clutch pedal switch -1- by turning 90° anti-clockwise.
  A47-0031
Installing
Installation is carried out in reverse sequence; note the following:
–  Pull operating rod of clutch pedal switch out onto stop.
–  Push clutch pedal down by hand.
–  Insert switch in mounting hole and secure by turning clockwise through 90° -arrows-.
–  Release clutch pedal
–  Install storage compartment on driver's side → Rep. Gr.68.
  N46-0310

Removing and installing clutch pedal switch F36 (round housing) > < Pedal cluster - exploded view of components