Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing sealing flanges and dual-mass flywheel/drive plate >
< Removing toothed belt from camshaft sprocket
A3 Mk1
Power unit
4-cylinder 1.8 ltr. 5-valve turbocharged engine (110-132 kW), mechanics
Enginecrankshaft group, pistons / Servicing work on pulley end
Positioning crankshaft at TDC with engine removed
Positioning crankshaft at TDC with engine removed
Positioning crankshaft at TDC with engine removed
Procedure
l
Toothed belt cover (top section) removed
–
Turn crankshaft at central bolt on crankshaft sprocket in direction of engine rotation to TDC mark.
l
At the same time the marking on the front of the camshaft sprocket must align with the marking on the cylinder head cover
-arrows-
.
–
Rotate crankshaft one turn further if necessary.
Power unit
4-cylinder 1.8 ltr. 5-valve turbocharged engine (110-132 kW), mechanics
Enginecrankshaft group, pistons / Servicing work on pulley end
Positioning crankshaft at TDC with engine removed
Removing and installing sealing flanges and dual-mass flywheel/drive plate >
< Removing toothed belt from camshaft sprocket