Audi Workshop Service and Repair Manuals

Special tools and workshop equipment required

• ◆ Adjustment tool for wiper jet
  3125 A fitted with needle 3125 / 5A

Notes:

• ◆ Settings for windscreen are calculated from weatherstrip -1- at side and from plenum chamber -2- at bottom.
• ◆ The settings indicate the values for a moving vehicle, i.e. the spray from the jets is slightly offset when the vehicle is stationary.

• ‒ → Use water-soluble pen to mark four points on windscreen.
• ‒ Dimension a = 240 ± 50 mm
• ‒ Dimension b = 190 ± 50 mm
• ‒ Dimension c = 320 ± 50 mm
• ‒ Aim adjustment tool at the points from each of the spray jets.