Following expiry of telematics service contract, telematics control unit can be used as a permanently installed telephone (with new SIM card). Telematics system fault messages can be suppressed in channel 7.
Indicated on display:
–
Press keys 0 and 7 (07 is used to select “Channel 7”).
Note!
An incorrect entry can be corrected after pressing C key.
–
Confirm entry by pressing Q key.
Adaption
Enter channel number XX
Indicated on display:
Channel selected and status currently stored are displayed on top line.
0 = Normal operation
1 = Fault messages suppressed
–
Press → key.
Channel 7 Adaption 0 ->
Indicated on display:
–
Enter new adaption value (e.g. 00001) if telematics system fault messages are to be suppressed.
–
Confirm entry by pressing Q key.
Channel 7 Adaption 0 ->
Enter adaption value XXXXX
Indicated on display:
–
Press → key.
Channel 7 Adaption 1 ->
Telephone only, no telematics faults
Indicated on display:
–
Confirm entry by pressing Q key.
Channel 7 Adaption 1 Q
Store altered value?
Indicated on display:
–
Press → key.
Channel 7 Adaption 1 ->
Altered value stored
Indicated on display:
–
Press keys 0 and 6 (06 is used to select “End of output” function).